-31%

Nano Board R3 CH340 chip With USB Mini Cable compatible with Arduino (soldered)

350.00 240.00

QUICK OVERVIEW
  1. Operating Voltage (logic level): 5V
  2. With USB cable and Soldered Connector
  3. 8 analog inputs ports: A0 ~ A7
  4. 14 Digital input / output ports: TX, RX, D2 ~ D13
  5. 1 pair of TTL level serial transceiver ports RX / TX
  6. Using Atmel Atmega328P-AU MCU
  7. Comes with cable
  8. There is a bootloader installed in it
  9. Standard 0.1” spacing DIP (breadboard friendly).
  10. Manual reset switch.

190 in stock

Category:

Description

The Nano Board R3 CH340 chip With USB Mini Cable chipboard is based on famous Arduino platform and does all the functions of Uno, but with a smaller footprint.

Nano Board R3 CH340 chip USB Mini Cable is vital for your small project where you don’t need much of a pin-outs but the small size is very important to make it look good.

The Nano equips a low-cost USB-Serial Chip that makes it less in price than Nano with FTDI USB-Serial Chip used on older versions of Nano.

The Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Nano R3). It has more or less the same functionality of the Uno but in a different package. It lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one.

The Nano Arduino can be power via the mini-USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.

The size of Nano V3.0 with CH340 Chip is only 43 mm x 18 mm; it comes with 6 PWM I/O from the total of 14 digitals I/O, 8 analog inputs, 16Mhz clock speed and 32kB of flash memory.

Note:- CH340 chip might not work directly with some PC/Laptop, you will need some ch340 drivers.
Model Type Nano
Color Blue
Microcontroller ATmega328
Operating Voltage 5
Input Voltage(Recommended) 7 to 12 V
Power Consumption 19 mA
Analog I/O Pins 8
Digital I/O Pins 22
PWM Output Pins 6
Architecture AVR
Clock Speed 16 MHz
DC Current per I/O Pin 40 mA
Flash Memory 32 KB of which 2 KB used by bootloader
EEPROM 1KB
SRAM 2KB
Dimensions (mm) LxWxH 45x18x5
Weight (gm) 8
Shipment Weight 0.105 kg
Shipment Dimensions 6 × 5 × 3 cm