FS-TH9X 2.4GHz 9CH Transmitter with FS-IA10B Receiver

12,999.00 7,099.00


  1. Transmitter: FS-TH9X Upgrade with FS-RM003 2.4GHz Module
  2. Receiver: FS-IA10B
  3. Default Mode: Mode-2
  4. Input Power: 12V DC (1.5V x 8  AAA Battery)
  5. Bidirectional System
  6. Frequencies-Hopping
  7. IT has IBUS SO you Dont need  PPM Encoder for Pixhawk
  8. Omni-directional High Gain Antenna
  9. Low Power Consupmtion


FS-TH9X 2.4GHz 9CH Upgrade Transmitter with FS-IA10B Receiver has revolutionized the way people experience RC, and now this radio transmitter and Receiver can stand up to the top competitions.
This Upgraded 9 channel with FS-RM003 2.4GHz Module TRANSMITTER’S AFHDS (automatic frequency hopping digital system), is developed by FLYSKY for all the Radio Control model lovers and is patented by FLYSKY at home. The system is specially developed for all the Radio control models, that offers super active and passive anti-jamming capabilities, very low power consumption and high receiver sensitivity. With extreme rigorous testing by engineers and studying the markets for years, FLYSKY AFHDS is now considered to be one of the best systems available in the market.

2.4GHz is the standard of new generation radio system because it has a lot of advantages. Operating at 2.4 GHz puts the radio control out of the frequency range of any ‘noise’ generated by the other electronic components on your helicopters – such as the brushless motor, Electronic speed controller, Servos and any metal to metal noise – eliminating interference and glitching that can affect traditional frequency system.

How to bind the RX (receiver) to the TX (transmitter):

  1. Plug bind plug into BAT, turn on plane/heli, the LED light should flash (make sure power is connected to RX via ESC)
  2. Hold down bind button on transmitter module while turning on the TX
  3. The light should go steady now
  4. Let go of bind button, turn off plane/heli, remove bind plug, turn off TX
  5. Turn on TX and then turn on plane/heli

Note:  If you need to connect the transmitter to a Lipo battery, please pay attention to the positive and negative of the interface, and connect the battery to the two pins on the left.


  1. Transmitter: FS-TH9X Upgrade with FS-RM003 2.4GHz Module
  2. Receiver: FS-IA10B
  3. Default Mode: Mode-2
  4. Input Power: 12V DC (1.5V x 8  AAA Battery)
  5. Bidirectional System
  6. Frequencies-Hopping
  7. Omni-directional High Gain Antenna
  8. Low Power Consumption


FS-TH9X Upgrade Transmitter with FS-RM003 2.4GHz Module:
  1. Brand Name: FlySky
  2. Item Name: FS-TH9X 2.4G 9CH Upgrade
  3. Channels: 9 Channels
  4. Model Type: quadcopter,glider, helicopter, airplane, also car or boat
  5. RF Range: 2.40-2.48GHz
  6. Bandwidth: 500Hz
  7. Band: 160
  8. RF Power: less than 20DB
  9. 2.4G System: AFHDS
  10. Modulation: GFSK
  11. Code Type: PPM/PCM
  12. Sensitivity: 1024
  13. LCD Type: 128 x 64 do
  14. Low Voltage Warning: yes(less than 9V)
  15. DSC Port: yes(3.5mm:output:PPM)
  16. Charger Port: yes
  17. Size: 180 x 220 x 70 mm
  18. Power: 12VDC or 8 x 1.5AA
  19. Weight: 670g
  20. Mode: Mode 2
  21. Control Range: 350-400m

The transmitter functions:

  1. Throttle curves
  2. Pitch curves
  3. Endpoint adjustments
  4. Subtrim
  5. Swash AFR mixes
  6. Servo reversing
  7. Timer
  8. Dual rate
  9. Exponential
  10. Flaperons
  11. V-Tail mixing
  12. Elevons

FS-IA10B Receiver:
  1. No. of Channels: 10
  2. Model Type: Fixed-Wing/Glider/Helicopter
  3. RF Range: 2.4055-2.475GHz
  4. RF Channel: 140
  5. RF Receiver Sensitivity: -105dBm
  6. Bandwidth: 500KHz
  7. 2.4GHz System: AFHDS 2A
  8. Modulation Type: GFSK
  9. Power: 4.0-6.5V DC
  10. Antenna Length: 26mm (Dual Antenna)
  11. Weight: 17.6g
  12. Size: 50.6*34.9*14.9mm
  13. i-BUS Port: Yes
  14. Data Acquisition Port: Yes
  15. Color: Black
  16. Certificate: CE0678, FCC

Package Includes:

1 x FlySky FS-TH9X 2.4G 9CH Transmitter (Mode 2)
1 x FS-IA10B 2.4GHz Receiver
1 x FS-RM003 2.4GHz Module
1 x Bind Plug
1 x User Manual


Code Type Digital
Bandwidth 500 KHz
Operating Voltage 12V DC (1.5AA x 8 Battery)
No. of Channels Receiver: 10
Transmitter: 9
Band-Range 2.40-2.48 GHz
Charging Port Yes
Sensitivity 1024
Default Operating Mode Mode 2 (Left-Hand Throttle)
Model Type Digital Radio Transreceiver
RF Power Less Than 20 dbm
DSC Port Yes (3.5mm:output:PPM)
Modulation Type GFSK
Color Black
Antenna Length Receiver: Dual Antenna-26 mm
Transmitter: 10 CM
Dimensions (mm) LxWxH 180 x 220 x 70
Low Voltage Warning Yes(at less than 9V)
Weight (gm) 680
Certificate CE,FCC
Shipment Weight 1.15 kg
Shipment Dimensions 30 × 25 × 15 cm